Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 414)

Short message Commands
Set Text Mode Parameters +CSMP
©Restricted
Page: 68 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.3 Set Text Mode Parameters +CSMP
17.3.1 Description
This command is used to select a value for <vp>, <pid>, and <dcs> and configure
the text mode.
17.3.2 Syntax
Action command
AT+CSMP=<fo>,<vp>,<pid>,<dcs>
OK
Read command
AT+CSMP?
+CSMP: <fo>,<vp>,<pid>,<dcs>
OK
Test command
None