Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 80
Global Configuration Commands
Features Management +WFM
©Restricted
Page:
74 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 1
August 23, 2007
81
"NOINTERRUPT"
no management of interruption
(default: 0)
83
"OFFWHENUNPLUG" off when unplug mode (default: 0)
84
"INTERRUPT"
interruption
for customer (default: 1)
9
"SWITCHATT"
switch attenuation feature (default: 1)
A
"CPHS"
CPHS feature (default: 1)
B
"SIMSPEEDENH"
SIM speed enhancement feature
(default:1)
C
"LOCA"
Location feature (default: 0)
D
"AMR"
AMR feature (default: 1)
E
"NT_6K"
NIRR bit management for network
(default: 1)
<status>:
feature <FtrID> status
0 disabled
1 enabled
<resetFlag>:
indicate if the Wireless CPU
®
must be reset to take into account
the feature <ftrID> state change
0
The feature has not been modified since the last boot of the
product.
1
The feature has been modified since the last boot of the
product; a reset must be performed to take the modifications
into account.
6.6.4
Parameter Storage
The <status> parameter is stored in EEPROM without using AT&W.