Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 502)

SIM ToolKit Commands
SIM ToolKit Give Response +STGR
©Restricted
Page: 156 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
19.5 SIM ToolKit Give Response +STGR
19.5.1 Description
This command allows the application/user to select an item in the main menu, or to
answer the following proactive commands:
• GET INKEY key pressed by the user
• GET INPUT message entered by the user
• SELECT ITEM selected item
• SETUP CALL user confirmation
• DISPLAY TEXT user confirmation to clear the message
• SETUP EVENT LIST reporting events
• SETUP IDLE MODE TEXT reporting events
It is also possible to terminate the current proactive command session by sending a
Terminal Response to the SIM, with the following parameters:
• BACKWARD MOVE process a backward move
• BEYOND CAPABILITIES command beyond ME capabilities
• UNABLE TO PROCESS ME is currently unable to process
• NO RESPONSE no response from the user
• END SESSION user abort
19.5.2 Syntax
Action command
AT+STGR=<CmdType>[,<Result>[,<Data>]]
[> <input text> <ctrl-Z/ESC>]
OK
Read command
None