Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 320)

GPRS Commands
GPRS Event reporting +CGEREP
©Restricted
Page: 130 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
• If <event>= NW CLASS or ME CLASS
Unsolicited response
+CGEV: <event> <class>
14.16.3 Parameters and Defined Values
<mode>:
buffer unsolicited result mode
0 disable buffer unsolicited result codes (default value)
2 enable buffer unsolicited result codes
<bfr>: handling method for buffered result codes
0 MT buffer of unsolicited result codes defined within this
command is cleared when <mode>=2 is entered.
<event>: GPRS event
ME REJECT A network request for PDP context activation occurred
when the MT was unable to report it to the TE with a
+CRING unsolicited result code and was automatically
rejected.
NW REACT The network has requested a context reactivation. The
<cid> that was used to reactivate the context is provided if
known to the MT.
NW DEACT The network has forced a context deactivation. The <cid>
that was used to activate the context is provided if known
to the MT.
ME DEACT The mobile equipment has forced a context deactivation.
The <cid> that was used to activate the context is provided
if known to the MT.
NW DETACH The network has forced a GPRS detach. This implies that all
active contexts have been deactivated. These are not
reported separately.
ME DETACH The mobile equipment has forced a GPRS detach. This
implies that all active contexts have been deactivated.
These are not reported separately.
NW CLASS The network has forced a change of MS class. The highest
available class is reported.
ME CLASS The mobile equipment has forced a change of MS class.
The highest available class is reported.
<PDP_type>: type of packet data protocol
"IP" Internet Protocol (IETF STD 5)
"PPP" Point to Point Protocol (IETF STD 51)