Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 136)

Wireless CPU ® Status Commands
Mobile Equipment Control Mode +CMEC
©Restricted Page: 130 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
7.6 Mobile Equipment Control Mode +CMEC
7.6.1 Description
This command selects the equipment which operates ME keypad, writes to ME
display and sets ME indicators. If operation mode is not allowed by the ME, "+CME
ERROR: <err>" is returned.
7.6.2 Syntax
Action command
AT+CMEC=<keyp>[,<disp>[,<ind>]]
OK
Read command
AT+CMEC?
+CMEC: <keyp>,<disp>,<ind>
OK
Test command
AT+CMEC=?
+CMEC: (list of supported <keyp>s),(list of supported
<disp>s),(list of supported <ind>s)
OK