Supplementary services commands – Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) User Manual
Page 529
Supplementary Services Commands
Unstructured Supplementary Service Data +CUSD
©Restricted
Page:
183 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001
VOLUME 3
August 23, 2007
20.7.3
Parameters and Defined Values
<n>:
requested operation
0
disable the result code presentation (default value)
1
enable the result code presentation
2
cancel session (not applicable to read command
response)
<m>:
USSD status
0
no further user action required (network initiated USSD-
Notify, or no further information needed after mobile
initiated operation)
1
further user action required (network initiated USSD-
Request, or further information needed after mobile
initiated operation)
2
USSD terminated by network
3
other local client has responded
4 operation
not
supported
5 network
timeout
<str>:
USSD string
converted in the selected character set (please refer to
+CSCS)
string type
<dcs>:
data coding scheme
integer type
Refer to [5] for more information.
20.7.4
Parameter Storage
The <n> parameter is stored in EEPROM without using AT&W. The default value can
be restored using AT&F command.