Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 137)

Wireless CPU ® Status Commands
Mobile Equipment Control Mode +CMEC
©Restricted Page: 131 / 184
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 1 August 23, 2007
7.6.3 Parameters and Defined Values
<keyp>: ME keypad control mode
2 ME can be operated from both ME keypad and TE
<disp>: ME display control mode
0 only ME can write to its display (+CDIS command can only be
used to read the display)
<ind>: ME indicators control mode
0 only ME can set the status of its indicators (+CIND command
can only be used to read the indicators)
7.6.4 Parameter Storage
None.
7.6.5 Examples
Command Responses
AT+CMEC=? +CMEC: (2),(0),(0)
OK
AT+CMEC=2,0,0 OK
AT+CMEC? +CMEC: 2,0,0
OK