Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 251)

Call Control Commands
Service Reporting Control +CR
©Restricted
Page: 61 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
12.14.3 Parameters and Defined Values
<mode>:
extended reports activation
0 disable (default value)
1 enable
<type>: type of call
ASYNC asynchronous transparent
REL ASYNC asynchronous non transparent
GPRS GPRS
12.14.4 Parameter Storage
The <mode> parameter is stored in EEPROM using the AT&W command. The default
value can be restored using AT&F.
12.14.5 Examples
Command Responses
AT+CR=? +CR: (0,1)
OK
AT+CR=1 OK
Note: Extended reports enabled Note: Command valid
AT+CR? +CR: 1
OK
ATD0612345678
Note: CSD data call
+CR: ASYNC
CONNECT 9600