Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 293)

GPRS Commands
Request GPRS IP Service D
©Restricted
Page: 103 / 156
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 2 August 23, 2007
14.6.4 Parameter Storage
None.
14.6.5 Examples
Command Responses
ATD*99***1# CONNECT
14.6.6 Notes
If <cid> is supported, its usage is the same as in the +CGDATA command. The
+CGDCONT, +CGQREQ, etc. commands may then be used in the Wireless CPU
®
initialization AT command string to set values for PDP type, APN, QoS etc…
If <cid> is not supported or is supported but omitted, the MT attempts to activate the
context using the 'Empty PDP type' (GSM 04.08, refer to [8] ). No PDP address or APN
is sent in this case and only one PDP context subscription record is present in the
HLR for this subscriber.
If a GPRS PPP session is already running, the setting of a CSD (GSM data call) is not
supported.