Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 419)

Short message Commands
Preferred Message Storage +CPMS
©Restricted
Page: 73 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.5 Preferred Message Storage +CPMS
17.5.1 Description
This command allows the message storage area to be selected (for reading, writing).
17.5.2 Syntax
Action command
AT+CPMS=<mem1>,[<mem2>,[<mem3>]]
+CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3>
OK
Read command
AT+CPMS?
+CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3>
OK
Test command
AT+CPMS=?
+CPMS: (list of supported <mem1>s,list of supported <mem2>s,list
of supported <mem3>s)
OK