Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 676)

Fax Commands
HDLC Transmit Speed +FTH
©Restricted
Page: 128 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
25.4 HDLC Transmit Speed +FTH
25.4.1 Description
This command sets the fax transmit speed using the HDLC protocol.
25.4.2 Syntax
Action command
AT+FTH=<speed>
OK
Read command
None
Test command
AT+FTH=?
(list of supported <speed>s)
OK
25.4.3 Parameters and Defined Values
<speed>: HDLC fax transmit speed
3 V.21 channels 300 bps
25.4.4 Parameter Storage
None.
25.4.5 Examples
Command Responses
AT+FTH=3
Note: Set fax speed at 300 bps
OK
AT+FTH=?
Note: Get possible values
(3)
OK