Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 658)

CPHS Commands
CPHS Command: +CPHS
©Restricted
Page: 110 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
24.1.3 Parameters and Defined Values
<Mode>: requested operation
this parameter has not effect for alternate line service, Network
Operator Name, CPHS information and Customer Profile Service
features (<FctId>=3,5,6,7).
default value: 0 for <FctId>=1,2,4
0 deactivate a CPHS feature
1 activate a CPHS feature
2 interrogate a CPHS status
< FctId>: CPHS feature CPHS feature
the Customer Service Profile and Alternate Line Service
features are activated if the field is set in CPHS information
and CSP files. The Network Operator Name is activated if at
least one of the two format names exist (long or short
format).This is done at initialization.
1 voice mail indicator
2 mail box number
3 alternate line service
4 diverted call indicator
5 network operator name
6 CPHS Information
7 Customer Service Profile
<Status>: CPHS feature state
0 disabled
1 enabled
<Lineld>: line identity
1 line 1
2 line 2
3 data
4 fax