Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 660)

CPHS Commands
CPHS Command: +CPHS
©Restricted
Page: 112 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
<InfoStatus>: CPHS information field status
0 service is not customer-accessible
1 service is customer-accessible
"xxxxxxxx" whole CPHS information bit field
hexadecimal string (8 digits)
<Service>: CSP field bit number
range: 1-81
Please refer to section “CSP constants” in the appendices.
<ServiceStatus>: CSP bit status
0 service is not customer-accessible
1 service is customer-accessible
24.1.4 Parameter Storage
The <Mode> parameter is stored in EEPROM without using the AT&W.command The
default value can be restored using AT&F.