Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 456)

Short message Commands
Message Overwriting +WMGO
©Restricted
Page: 110 / 202
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 3 August 23, 2007
17.18 Message Overwriting +WMGO
17.18.1 Description
The Wavecom proprietary +WMGO command is used to specify a location in the SIM
or Flash memory, for the next SMS storing with +CMGW command. The defined
location is used only once: +WMGO has to be used again to perform another
overwrite.
17.18.2 Syntax
Action command
AT+WMGO=<loc>
OK
Read command
AT+WMGO?
+WMGO: <loc>
OK
Test command
AT+WMGO=?
(list of supported <loc>s)
OK
17.18.3 Parameters and Defined Values
<loc>:
location number of the SMS to write or overwrite
Number depends of the SIM or Flash memory capacity.
17.18.4 Parameter Storage
None.