Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 785)

APPENDIXES
Technical Appendixes
© Restricted
Page: 79 / 80
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 APPENDIXES August 23, 2007
Data number Stop number Kind of Parity AT+ICF? responses
Mark
Space
Not supported
always replies:
"+ICF: 5,4"
7 2 None +IFC: 4,4
Odd +IFC: 5,0
Even +IFC: 5,1
Mark
Space
Not supported
always replies:
"+ICF: 5,4"
8 or 7 1.5 None
Odd
Even
Mark
Space
Not supported
always replies "+ICF:
2,4"
AT+ICF=? will provide the same responses as it is sent on UART1 or 2.
• AT+CFUN=1 - Wireless CPU ® reset
Normally (when using UART1/2 to manage the Wireless CPU ® ) the OK response is
sent to the application after the Wireless CPU ® reset.
When using the emulated serial port a such response is not provided ! In addition the
Wireless CPU ® reset will cause the USB stack stopping. From the host’s point of view
it is similar to a USB cable disconnection. As consequence the host is going to un-
install the Wavecom USB driver and the application will reference a non valid driver.
• AT+WDWL - firmware download
This command is unsupported when using the USB serial emulated port.