Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 585)

Audio Commands
Audio Filter Command +WADF
©Restricted
Page: 37 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
21.10.5 Examples
Command Responses
AT+WADF=?
Note: Possible values
+WADF: (0-2),(1-4),(0-65535),(0-
65535),(0-65535),(0-65535),(0-
65535),(0-65535),(0-65535),(0-
65535),(0-65535),(0-65535)
OK
AT+WADF?
Note : Read the status and parameter values for all
filters
+WADF:
0,1,4032,61562,57484,8051,4032,0,0,
61617,3742,3919
+WADF:
0,2,4032,61562,57484,8051,4032,0,0,
61617,3742,3919
+WADF:
0,3,0,0,0,0,4096,0,0,0,0,4096
+WADF:
0,4,0,0,0,0,4096,0,0,0,0,4096
OK
AT+WADF=1,1,0,1,2,3,4,5,6,7,8,9
Note: Activate the high pass filter in TX mode with
params (0,1,2,3,4,5,6,7,8,9)
OK
AT+WADF=2,1
Note: Ask for the current params values of the high
pass filter in TX mode
+WADF: 1,1,0,1,2,3,4,5,6,7,8,9
OK
AT+WADF?
Note: Ask for the current params values of all filters
+WADF: 1,1,0,1,2,3,4,5,6,7,8,9
+WADF: 0,2,4032,61562,57484,8051,
4032,0,0,61617,3742,3919
+WADF:
0,3,0,0,0,0,4096,0,0,0,0,4096
+WADF:
0,4,0,0,0,0,4096,0,0,0,0,4096
OK
AT+WADF=1,1,9,8,7,6,5,4,3,2,1,0
Note : Update the params value of the high pass
filter in TX mode. The <mode> parameter has the
current value, the activation mode will not change.
OK