Rainbow Electronics FARGO MAESTRO 100 (with TCP_IP) - Manual (Page 700)

Fax class 2 Commands
DCE Capabilities Parameters +FDCC
©Restricted
Page: 152 / 158
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without
prior written agreement.
WM_DEV_OAT_UGD_049 - 001 VOLUME 4 August 23, 2007
<ec>: error correction
0 disable Fax ECM
<bf>: binary file transfer
0 disable
<st>: scan time per line
if <vr>=0 if <vr>=1
0 0 ms (default) 0 ms (default)
1 5 ms 5 ms
2 10 ms 5 ms
3 10 ms 10 ms
4 20 ms 10 ms
5 20 ms 20 ms
6 40 ms 20 ms
7 40 ms 40 ms
26.11.4 Parameter Storage
The parameters are stored in EEPROM using the AT&W command. The default value
can be restored using AT&F.
26.11.5 Examples
Command Responses
AT+FDCC=? (0,1),(0-5),(0-2),(0-2),(0-3),
(0),(0),(0-7)
OK
AT+FDCC=,4 OK
Note: Change bit rate
AT+FDCC? 0,4,0,2,0,0,0,0
OK