Yaskawa Z1000 AC Drive HVAC - Manual (Page 239)

6.3 Connecting Peripheral Devices
Figure 6.1 illustrates how to configure the drive and motor to operate with various peripheral devices.
Refer to the specific manual for the devices shown below for more detailed installation instructions.
Drive
Ground
Power
Supply
Line
Breaker
(MCCB)
or
Leakage
Breaker
Surge
Absorber
Input Side
Noise Filter
Motor
U/T1 V/T2 W/T3 R/L1S/L2 T/L3
Ground
USB Copy Unit
USB Cable
(Type-AB, sold separately)
HOA Keypad
USB Cable
(Type-AB)
24 V Power
Supply Unit
AC
Reactor
Fuses
PC
Engineering
Software Tools
DriveWizard HVAC
Figure 6.1 Connecting Peripheral Devices
Note: If the drive is set to trigger a fault output when the fault restart function is activated (L5-02 = 1), then a sequence to interrupt power when
a fault occurs will turn off the power to the drive while the drive attempts to restart. The default setting for L5-02 is 0 (fault output active
during restart).
6.3 Connecting Peripheral Devices
YASKAWA ELECTRIC TOEP YAIZ1U 03A YASKAWA AC Drive – Z1000 User Manual 239
6
Peripheral Devices & Options