Yaskawa Z1000 AC Drive HVAC - Manual (Page 250)

A.1 Power Ratings
u Three-Phase 600 V Class Drive Models 5A0003 to 5A0032
Table A.1 Power Ratings (Three-Phase 600 V Class)
Item Specification
Drive Models 5A0003 5A0004 5A0006 5A0009 5A0011 5A0017 5A0022 5A0027 5A0032
Maximum Applicable Motor Capacity
(HP) <1>
2 3 5 7.5 10 15 20 25 30
Input
Input Current (A) <2> 3.6 5.1 8.3 12 16 23 31 38 45
Rated Voltage
Rated Frequency
Three-phase 500 to 600 Vac 50/60 Hz
Allowable Voltage
Fluctuation
-10 (-15) to +10%
Allowable Frequency
Fluctuation
±5%
Input Power (kVA) 4.1 5.8 9.5 14 18 26 35 43 51
Output
Rated Output Capacity
(kVA) <3> <4>
2.7 3.9 6.1 9 11 17 22 27 32
Rated Output Current
(A) <4>
2.7 3.9 6.1 9 11 17 22 27 32
Overload Tolerance
110% of rated output for 60 s
140% of rated output for 0.5 s
Carrier Frequency User adjustable between 1 and 12.5 kHz
Maximum Output
Voltage (V)
Three-phase 500 to 600 Vac (proportional to input voltage)
Maximum Output
Frequency (Hz)
240 Hz
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater than
the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring
connections, and power supply impedance.
<3> Rated motor capacity is calculated with a rated output voltage of 575 V.
<4> Carrier frequency is set to 2 kHz. Current derating is required to raise the carrier frequency.
A.1 Power Ratings
250 YASKAWA ELECTRIC TOEP YAIZ1U 03A YASKAWA AC Drive – Z1000 User Manual