Teledyne 6200T - Sulfides Analyzer - Manual (Page 120)

Setup Menu Model 6200T Total Sulfur Analyzer
Teledyne Analytical Instruments 120
The following DC current output limits apply to the current loop modules:
Table 5-6: Analog Output Current Loop Range
RANGE MINIMUM OUTPUT MAXIMUM OUTPUT
0-20 mA 0 mA 20 mA
These are the physical limits of the current loop modules, typical applications use 2-20 or 4-20 mA for the lower
and upper limits. Please specify desired range when ordering this option.
The default offset for all ranges is 0 mA.
ANALOG OUT
A1 A2 A3 A4
+ - + - + - + -
Refer to Figure 3-4 for the location of the analog output connector on the instrument’s
rear panel and Table 3-6 for pin assignments.