Teledyne 6200T - Sulfides Analyzer - Manual (Page 94)

Overview of Operating Modes Model 6200T Total Sulfur Analyzer
Teledyne Analytical Instruments 94
To view and clear warning messages, press:
SAMPLE RANGE = 500.000 PPB SO2 =XXX.X
TEST CAL MSG CLR SETUP
Make sure warning messages are
not due to real problems.
Press CLR to clear the current
message.
If more than one warning is active, the
next message will take its place
Once the last warning has been
cleared, the analyzer returns to
SAMPLE mode.
SAMPLE RANGE=500.000 PPM SO2=XXX.X
< TST TST > CAL
MSG CLR SETUP
SAMPLE HVPS WARNING SO2=XXX.X
TEST CAL
MSG CLR SETUP
TEST ignores warning messages
MSG activates warning
messages.
<TST TST > buttons replaced with
TEST button
NOTE:
If the warning message persists
after several attempts to clear it,
the message may indicate a real
problem and not an artifact of the
warm-up period.
Figure 4-3: Viewing and Clearing 6200T WARNING Messages