Teledyne 6200T - Sulfides Analyzer - Manual (Page 207)

6200T Total Sulfur Analyzer Calibration Procedures
Teledyne Analytical Instruments 207
9.10.1.3. Activate O
2
Sensor Stability Function
To change the stability test function from SO
2
concentration to the O
2
sensor output,
press:
Figure 9-15: Activate O
2
Sensor Stability Function
I MPORTANT I MPACT ON R EADINGS OR D ATA
Use the same procedure to reset the STB test function to SO
2
when the
O
2
calibration procedure is complete.