Teledyne 6200T - Sulfides Analyzer - Manual (Page 162)

DAS and AICOM Model 6200T Total Sulfur Analyzer
Teledyne Analytical Instruments 162
7.2.1. Viewing DAS Data and Settings
DAS data and settings can be viewed on the front panel through the following control
button sequence.
SAMPLE RANGE = 500.000 PPB SO2 =XXX.X
< TST TST > CAL SETUP
SETUP X.X CONC : DATA AVAILABLE
NEXT VIEW EXIT
SETUP X.X PNUMTC : DATA AVAILABLE
PREV NEXT VIEW EXIT
SETUP X.X CALDAT : DATA AVAILABLE
PREV NEXT VIEW EXIT
SETUP X.X 00:00:00 SLOPE1=0.000
PV10 PREV <PRM PRM> EXIT
SETUP X.X 00:00:00 CONC1 =XXXX PPB
PV10 PREV NEXT NX10 <PRM PRM> EXIT
SETUP X.X 00:00:00 SMPFLW=000.0 cc / m
<PRM PRM> EXIT
SETUP X.X DATA ACQUISITION
VIEW EDIT EXIT
SETUP X.X PRIMARY SETUP MENU
CFG
DAS RNGE PASS CLK MORE EXIT
MENU BUTTON FUNCTIONS
BUTTON FUNCTION
<PRM Moves to the next Parameter
PRM> Moves to the previous
Parameter
NX10 Moves the view forward 10
data points/channels
NEXT Moves to the next data
point/channel
PREV Moves to the previous data
point/channel
PV10 Moves the view back 10 data
points/channels
Buttons only appear as needed
EXIT will return to the
main SAMPLE Display.
SAMPLE ENTER SETUP PASS : 818
8 1 8 ENTR EXIT
SETUP X.X DETAILED : DATA AVAILABLE
PREV NEXT VIEW EXIT
SETUP X.X 00:00::00 PMTDET=0000.0000 m
PV10 PREV <PRM PRM> EXIT
SETUP X.X FAST : DATA AVAILABLE
PREV VIEW EXIT
SETUP X.X 00:00::00 PMTDET=0000.0000 m
PV10 PREV <PRM PRM> EXIT
Figure 7-2: DAS – Data Acquisition Menu