Teledyne 6200T - Sulfides Analyzer - Manual (Page 141)

6200T Total Sulfur Analyzer Communications Setup
Teledyne Analytical Instruments 141
To turn on or off the communication modes for either COM1 or COM2, access the
SETUP>MORE>[COM1 or COM2] menu and at the COM1[2] Mode menu press
EDIT.
Continue pressing NEXT to scroll through the
available Modes and press the ON or OFF button
to enable or disable each mode.
SETUP X.X COMMUNICATIONS MENU
ID INET COM1 COM2 EXIT
SETUP X.X COM1 MODE: 32
SET> EDIT EXIT
SETUP X.X COM1 QUIET MODE: OFF
NEXT OFF ENTR EXIT
Select which COM
port to configure
The sum of the mode
IDs of the selected
modes is displayed
here
Figure 6-1: COMM – Communication Modes Setup