Sample period and report period, 6200t total sulfur analyzer das and aicom – Teledyne 6200T - Sulfides Analyzer User Manual
Page 167
6200T Total Sulfur Analyzer
DAS and AICOM
Teledyne Analytical Instruments
167
To configure the parameters for a specific data parameter, follow the instructions as
shown in Figure 7-6, then press:
SETUP X.X
0) PARAM=CONC1, MODE=AVG
PREV NEXT
INS DEL EDIT EXIT
SETUP X.X
PARAMETERS:CONC1
SET> EDIT
EXIT
SETUP X.X
SAMPLE MODE:AVG
<SET SET>
EDIT
EXIT
SETUP X.X
PARAMETERS: CONC1
PREV NEXT
ENTR
EXIT
Cycle through list of available
Parameters.
ENTR
accepts the new
setting and returns to the
previous menu.
EXIT
ignores the new setting
and returns to the previous
SETUP X.X
SAMPLE MODE: AVG
INST AVG SDEV MIN MAX
ENTR EXIT
Press any button for the desired mode
SETUP X.X
PRECISION: 1
<SET SET>
EDIT
EXIT
SETUP X.X
PRECISION: 1
1
ENTR EXIT
Set for 0-4
SETUP X.X
STORE NUM. SAMPLES: OFF
<SET
EDIT
EXIT
SETUP X.X
STORE NUM. SAMPLES: OFF
OFF
ENTR EXIT
Turn ON or OFF
<SET
Returns to
previous
Functions
Figure 7-7: DAS – Configuring Parameters for a Specific Data Parameter
7.2.5. Sample Period and Report Period
The DAS defines two principal time periods by which sample readings are taken and
permanently recorded: