Setup menu, Setup – cfg: configuration information, Setup – acal: automatic calibration option – Teledyne 6200T - Sulfides Analyzer User Manual
Page 97: Setup – das: internal data acquisition system, 6200t total sulfur analyzer setup menu
6200T Total Sulfur Analyzer
Setup Menu
Teledyne Analytical Instruments
97
5. SETUP MENU
The SETUP menu is used to set instrument parameters for performing configuration,
calibration, reporting and diagnostics operations according to user needs.
5.1. SETUP – CFG: Configuration Information
Pressing the CFG button displays the instrument configuration information. This display
lists the analyzer model, serial number, firmware revision, software library revision,
CPU type and other information. Use this information to identify the software and
hardware when contacting customer service. Special instrument or software features or
installed options may also be listed here.
SAMPLE RANGE = 500.000 PPB SO2 =XXX.X
< TST TST > CAL
SETUP
SAMPLE
ENTER SETUP PASS : 818
8 1 8
ENTR
EXIT
SAMPLE
PRIMARY SETUP MENU
CFG
DAS RNGE PASS CLK MORE EXIT
SAMPLE
T100 SO2 ANALYZER
NEXT
PREV
EXIT
Press EXIT at
any time to
return to
SETUP menu
Press EXIT at
any time to
return to the
SAMPLE display
Press NEXT of PREV to move back
and forth through the following list
of Configuration information:
MODEL NAME
SERIAL NUMBER
SOFTWARE REVISION
LIBRARY REVISION
iCHIP SOFTWARE REVISION
1
HESSEN PROTOCOL REVISION
1
ACTIVE SPECIAL SOFTWARE
OPTIONS
1
CPU TYPE
DATE FACTORY CONFIGURATION
SAVED
1
Only appears if relevant option of Feature is active.
Figure 5-1: SETUP – Configuration Information
5.2. SETUP – ACAL: Automatic Calibration Option
The menu button for this option appears only when the instrument has the zero span
and/or IZS options. See Section 9.8 for details.
5.3. SETUP – DAS: Internal Data Acquisition System
Use the SETUP>DAS menu to capture and record data. Refer to Section 6.6 for
configuration and operation details.
5.4. SETUP – RNGE: Analog Output Reporting Range
Configuration
Use the SETUP>RNGE menu to configure output reporting ranges, including scaled
reporting ranges to handle data resolution challenges. This section describes
configuration for Single, Dual, and Auto Range modes.