Safety messages – Teledyne 6200T - Sulfides Analyzer User Manual
Page 7
6200T Total Sulfur Analyzer
Safety Messages
Teledyne Analytical Instruments
vii
SAFETY MESSAGES
Important safety messages are provided throughout this manual for the purpose of avoiding personal injury or
instrument damage. Please read these messages carefully. Each safety message is associated with a safety
alert symbol, and are placed throughout this manual; the safety symbols are also located inside the instrument.
It
is imperative that you pay close attention to these messages, the descriptions of which are as
follows:
WARNING
: Electrical Shock Hazard
HAZARD
: Strong oxidizer
GENERAL WARNING/CAUTION
: Read the accompanying message for
specific information.
CAUTION
: Hot Surface Warning
Do Not Touch
: Touching some parts of the instrument without
protection or proper tools could result in damage to the part(s) and/or the
instrument.
Technician Symbol
: All operations marked with this symbol are to be
performed by qualified maintenance personnel only.
Electrical Ground
: This symbol inside the instrument marks the central
safety grounding point for the instrument.
CAUTION
This instrument should only be used for the purpose and in the manner
described in this manual. If you use this instrument in a manner other than
that for which it was intended, unpredictable behavior could ensue with
possible hazardous consequences.
NEVER use any gas analyzer to sample combustible gas(es)!
Note: Technical Assistance regarding the use and maintenance of the 6200T or any other
Teledyne product can be obtained by contacting Teledyne Customer Service
Department:
Phone: 888-789-8168
Email:
or by accessing various service options on our website at
http://www.teledyne-ai.com/