Teledyne 6200T - Sulfides Analyzer - Manual (Page 4)

Configuration Model 6200T Total Sulfur Analyzer
Teledyne Analytical Instruments iv
Selected Options for the Model 6200T
Calibrator Option:
This option includes a Model 702 Calibrator for precise blending of calibration gases.
Mounting Options
19” rack mounting with 26” sliders with ears
19” rack mounting with ears only
Rear Panel Gas Fittings
1/4” SS Standard
6 mm SS Optional
Valve Options
The standard unit includes internal span and zero valves. Additional valve options are
as follows:
Internal Zero/Span Valves with Oven (IZS Option)
Internal Zero/Span Valves with Oven and Permeation Tube.
Note: The permeation tube option installed depends on the sample gas (H
2
S or SO
2
)
and the effusion rate.
Alarm Relays
The standard instrument is equipped with two configurable concentration alarms and
one fixed system failure alarm.
Profibus Mounting Option
RS232 to Profibus Circuit Board: Special RS232 to Profibus PCB card for Profibus
communication using the existing RS232 port.
Background Gas:
Notes: