Teledyne 6200T - Sulfides Analyzer - Manual (Page 332)

ESD Primer Model 6200T Total Sulfur Analyzer
332 Teledyne Analytical Instruments
Analytical Instruments’s Customer Service in anti-ESD bins, tubes or bags.
DO NOT use pink-poly bags.
 NEVER allow any standard plastic packaging materials to touch the electronic
component/assembly directly.
 This includes, but is not limited to, plastic bubble-pack, Styrofoam peanuts, open
cell foam, closed cell foam, and adhesive tape.

DO NOT use standard adhesive tape as a sealer. Use ONLY anti-ESD tape.
1. Open the outer shipping box away from the anti-ESD work area.
2. Carry the still sealed anti-ESD bag, tube or bin to the anti-ESD work area.
3. Follow steps 6 and 7 of Section 14.5.3 above when opening the anti-ESD container at
the work station.
4. Reserve the anti-ESD container or bag to use when packing electronic components
or assemblies to be returned to Teledyne Analytical Instruments.
5. Never carry any component or assembly without placing it in an anti-ESD bag or bin.
6. Before using the bag or container, allow any surface charges on it to dissipate:
 If you are at the instrument rack, hold the bag in one hand while your wrist
strap is connected to a ground point.
 If you are at an anti-ESD workbench, lay the container down on the
conductive work surface.
 In either case wait several seconds.
7. Place the item in the container.
8. Seal the container. If using a bag, fold the end over and fasten it with anti-ESD tape.
 Folding the open end over isolates the component(s) inside from the effects
of static fields.
 Leaving the bag open or simply stapling it shut without folding it closed
prevents the bag from forming a complete protective envelope around the
device.
I MPORTANT If you do not already have an adequate supply of anti-ESD bags or
containers available, Teledyne Analytical Instruments’s Customer
Service department will supply them. Follow the instructions listed
above for working at the instrument rack and workstation.