Teledyne 6200T - Sulfides Analyzer - Manual (Page 24)

Introduction Model 6200T Total Sulfur Analyzer
Teledyne Analytical Instruments 24
 Front panel USB ports for peripheral devices
 Digital status outputs to indicate instrument operating condition
 Adaptive signal filtering to optimize response time
 Temperature and Pressure compensation
 Internal Zero and Span check (optional)
 Internal data logging with 1 min to 365 day multiple averages
 Critical flow orifices to provide flow stability
1.3. 6200T Documentation
In addition to this operation manual, two other manuals are available for download from
a Teledyne website at http://www.teledyne-api.com/manuals/ to support the operation
of this instrument:.
 AICOM software manual, part number 03945
 DAS Manual, part number 02837
1.4. Options
The options available for your analyzer are presented in Table 1-1 with name, option
number, a description and/or comments, and if applicable, cross-references to technical
details in this manual, such as setup and calibration. See also pages iii and iv for specific
options included in your analyzer. To order these options or to learn more about them,
please contact the Sales department of Teledyne Analytical Instruments at:
TOLL-FREE: (888) 789-8168
TEL: (626) 934-1500
FAX: (626) 961-2538
E-MAIL: [email protected]
WEB SITE:
http://www.teledyne-ai.com/
Table 1-1: Analyzer Options
OPTION
OPTION
NUMBER
DESCRIPTION/NOTES REFERENCE
Pumps
Pumps meet all typical AC power supply standards while exhibiting same pneumatic
performance.
10A External Pump 100V - 120V @ 60 Hz N/A
10B External Pump 220V - 240V @ 50 Hz N/A
10C External Pump 220V - 240V @ 60 Hz N/A
10D External Pump 100V – 12V @ 50 Hz N/A
10E External Pump 100V @ 60 Hz N/A
11B Pumpless, internal or external Pump Pack N/A
13 High Voltage Internal Pump 240V @ 50Hz N/A
Rack Mount
Kits
Options for mounting the analyzer in standard 19” racks
20A Rack mount brackets with 26 in. chassis slides N/A
20B Rack mount brackets with 24 in. chassis slides N/A