Epa equivalency designation, 6200t total sulfur analyzer specifications – Teledyne 6200T - Sulfides Analyzer User Manual
Page 37
6200T Total Sulfur Analyzer
Specifications
Teledyne Analytical Instruments
37
Table 2-4: M501TS Converter Specifications
Specification Value
Unit
Maximum Flow Rate
1000
cc/min
Nominal Flow Rate (CO
2
) 625
cc/min
Nominal Flow Rate (Air/N
2
) 450
cc/min
Maximum TS Concentration for specified
conversion efficiency
20 ppmv
Minimum Conversion Efficiency
(In CO
2
matrix)
H
2
S
COS, CS
2
98
90
%
Least Discernible Level (LDL)
See 6400T Manual
Operating Converter Temperature
1000
˚ C
Maximum Converter Temperature
1050
˚ C
Power
100-120/220-240 VAC
50/60 Hz, 440 watts
Weight
24 (11)
lbs. (kg)
Dimensions
7 x 17 x 22 (178 x 432 x 559)
inches (mm)
2.2. EPA Equivalency Designation
The 6200T Analyzer is designated as Reference Method Number EQSA-0495-100 as
per 40 CFR Part 53 when operated under the following conditions:
Range: Any range from 50 parts per billion (ppb) to 10 parts per million
(ppm)
Ambient temperature range of 5°C to 40°C
Line voltage range of 100-120 VAC or 220-240 VAC, at 50 or 60 Hz
Sample filter: Equipped with PTFE filter element in the internal filter
assembly
Sample flow of 650 +/- 65 cm3/min
Vacuum pump (internal) capable of 14" Hg Absolute pressure @ 1 slpm or
better
Software settings:
Linearity
<± 0.1% CO
2
Temperature Coefficient
<± 0.01% CO
2
/°C
Rise and Fall Time
<60 seconds to 95%
1
As defined by the USEPA
2
Defined as twice the zero noise level by the USEPA