Part 1 specification – IAI America REXT User Manual
Page 105
Advertising
Part 1 Specification
Chapter 3 Gateway R unit
83
Part 1 Specification
(5) Servo ON Command (SON) PLC Output Signal
Ready (SV) PLC Input Signal
Turn the SON signal “1” (ON), and the servo will turn on. When the servo is turned ON, the SV LED (green) on the front
panel of the controller will illuminate.
The SV signal is synchronized with this LED indicator.
ڦ
Function
The SON signal can be used to turn ON/OFF the controller servo.
The controller servo remains on and thus the controller can be operated while the SV signal is “1” (ON).
The relationship of SON and SV signals is shown below.
-105-
Advertising