IAI America REXT - Manual (Page 336)


Part 2 Startup Chapter
Chapter 5 Network Setup
310
Part 2 Startup Chapter
(2) Creating an I/O table
[1] Change the PLC operation mode to the “program mode.”
x Select [PLC] from the CX-Programmer menu bar, select [Operation Modes], and then select [Program].
x When the dialog box appears, click [Yes].
* Dialog boxes may not appear depending on the CX-Programmer environment settings. The following explanation
is based on the assumption that the checkbox for “Check all operations that affect the PLC” is selected.
x Confirm that “Program Mode” is displayed to the right of the PLC model on the CX-Programmer project tree.
-336-