IAI America REXT - Manual (Page 327)

0
Part 2 Startup Chapter
Chapter 5 Network Setup
301
Part 2 Startup Chapter
(11) Auxiliary Setting Function
You can check the PIO pattern number of the applicable controller you should set for the mode set with the gateway
parameter setting tool.
[1] Click [Help] from the menu bar on the main screen of the ROBONET gateway parameter setting tool, and then
select [PIO Pattern for Each Mode].
[2] Adjust the PIO pattern of the applicable controller (set by a parameter) to the mode you have just set.
This screen also appears after transferring the parameters.
If the “Do not show this screen after the transfer” check box is selected in the bottom left-hand corner of the screen, this
screen will no longer appear after the transfer.
-327-