IAI America REXT - Manual (Page 109)


Part 1 Specification
Chapter 3 Gateway R unit
87
Part 1 Specification
Zone signal ON area
Set values
Zone setting+: 70q
Zone setting-: 315q
Set values
Zone setting+: 315q
Zone setting-: 70q
Set values
Zone setting+: 70 mm
Zone setting-: 30 mm
Set values
Zone setting+: 30 mm
Zone setting-: 70 mm
Examples are shown below.
[Rotary actuator in the index mode]
[Linear axis]
Current position
Zone signal output
Zone signal output
Caution
The specifics of the zone function vary depending on the application version.
y In applications of version 0015 and older, zone signals will not be output if the parameters are set as follows:
Zone setting+ d Zone setting-
y In applications of version 0016 and later, zone signals will not be output if the parameters are set as follows:
Zone setting+ = Zone setting-
-109-