IAI America REXT - Manual (Page 341)


Part 2 Startup Chapter
Chapter 5 Network Setup
315
Part 2 Startup Chapter
x When the “Node address setup” dialog box appears, enter the node address and click [OK].
x Confirm that the master unit has been registered to the Network configuration window.
[2] Registering a controller
x Select [Insert] from the menu bar, and select [Compo].
x Select the slave unit to be connected from the Compo list, and click [Finish].
x When the “Node address setup” dialog box appears, enter the node address and click [OK].
x Confirm that the slave unit has been registered to the Network configuration window.
The slave unit location will be as follows.
-341-