LevelOne GTL-2691 - Manual (Page 1011)

C HAPTER 31 | Interface Commands
Interface Configuration
– 1011 –
show interfaces
switchport
This command displays the administrative and operational status of the
specified interfaces.
S YNTAX
show interfaces switchport [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)
D EFAULT S ETTING
Shows all interfaces.
C OMMAND M ODE
Normal Exec, Privileged Exec
C OMMAND U SAGE
If no interface is specified, information on all interfaces is displayed.
E XAMPLE
This example shows the configuration setting for port 21.
Console#show interfaces switchport ethernet 1/21
Information of Eth 1/1
Broadcast Threshold : Enabled, 500 packets/second
Multicast Threshold : Disabled
Unknown Unicast Threshold : Disabled
LACP Status : Disabled
Ingress Rate Limit : Disabled, 1000M bits per second
Egress Rate Limit : Disabled, 1000M bits per second
VLAN Membership Mode : Hybrid
Ingress Rule : Disabled
Acceptable Frame Type : All frames
Native VLAN : 1
Priority for Untagged Traffic : 0
GVRP Status : Disabled
Allowed VLAN : 1(u)
Forbidden VLAN :
Private-VLAN Mode : None
Private-VLAN host-association : None
Private-VLAN Mapping: None
802.1Q-tunnel Status: Disable
802.1Q-tunnel Mode: NORMAL
802.1Q-tunnel TPID: 8100(Hex)
Console#