LevelOne GTL-2691 - Manual (Page 1218)

C HAPTER 42 | Multicast Filtering Commands
MLD Snooping
– 1218 –
ipv6 mld snooping This command enables MLD Snooping globally on the switch. Use the no
form to disable MLD Snooping.
S YNTAX
[no] ipv6 mld snooping
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Global Configuration
E XAMPLE
The following example enables MLD Snooping:
Console(config)#ipv6 mld snooping
Console(config)#
ipv6 mld snooping
querier
This command allows the switch to act as the querier for MLDv2 snooping.
Use the no form to disable this feature.
S YNTAX
[no] ipv6 mld snooping querier
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Global Configuration
ipv6 mld snooping vlan
mrouter
Adds an IPv6 multicast router port GC
ipv6 mld snooping vlan
static
Adds an interface as a member of a multicast group GC
show ipv6 mld snooping Displays MLD Snooping configuration PE
show ipv6 mld snooping
group
Displays the learned groups PE
show ipv6 mld snooping
group source-list
Displays the learned groups and corresponding source
list
PE
show ipv6 mld snooping
mrouter
Displays the information of multicast router ports PE
Table 146: MLD Snooping Commands (Continued)
Command Function Mode