LevelOne GTL-2691 - Manual (Page 1202)

C HAPTER 42 | Multicast Filtering Commands
IGMP Snooping
– 1202 –
C OMMAND U SAGE
This command displays global and VLAN-specific IGMP configuration
settings. See "Configuring IGMP Snooping and Query Parameters" on
page 515 for a description of the displayed items.
E XAMPLE
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
IGMP Snooping : Enabled
Router Port Expire Time : 300 s
Router Alert Check : Disabled
TCN Flood : Disabled
TCN Query Solicit : Disabled
Unregistered Data Flood : Disabled
Unsolicited Report Interval : 400 s
Version Exclusive : Disabled
Version : 2
Proxy Reporting : Enabled
Querier : Disabled
VLAN 1:
--------
IGMP Snooping : Enabled
IGMP Snooping Running Status : Inactive
Version : Using global version (2)
Version Exclusive : Using global status (Disabled)
Immediate Leave : Disabled
Last Member Query Interval : 10 (1/10s)
Last Member Query Count : 2
General Query Suppression : Disabled
Query Interval : 125
Query Response Interval : 100 (1/10s)
Proxy Query Address : 0.0.0.0
Proxy Reporting : Using global status (Enabled)
Multicast Router Discovery : Enabled
.
.
.
show ip igmp
snooping group
This command shows known multicast group, source, and host port
mappings for the specified VLAN interface, or for all interfaces if none is
specified.
S YNTAX
show ip igmp snooping group [host-ip-addr ip-address interface |
igmpsnp | sort-by-port | user | vlan vlan-id [user | igmpsnp]]
ip-address - IP address for multicast group
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)