LevelOne GTL-2691 - Manual (Page 185)

C HAPTER 5 | Interface Configuration
Trunk Configuration
– 185 –
W EB I NTERFACE
To display LACP settings and status for the local side:
1.
Click Interface, Trunk, Dynamic.
2. Select Configure Aggregation Port from the Step list.
3. Select Show Information from the Action list.
4. Click Internal.
5. Select a group member from the Port list.
Figure 52: Displaying LACP Port Internal Information
Admin State,
Oper State
(continued)
◆ Aggregation – The system considers this link to be aggregatable;
i.e., a potential candidate for aggregation.
◆ Long timeout – Periodic transmission of LACPDUs uses a slow
transmission rate.
◆ LACP-Activity – Activity control value with regard to this link.
(0: Passive; 1: Active)
Table 9: LACP Internal Configuration Information (Continued)
Parameter Description