LevelOne GTL-2691 - Manual (Page 167)

C HAPTER 5 | Interface Configuration
Port Configuration
– 167 –
C OMMAND U SAGE
◆ Traffic can be mirrored from one or more source ports to one
destination port on the same switch.
◆ Monitor port speed should match or exceed source port speed,
otherwise traffic may be dropped from the monitor port.
◆ When mirroring port traffic, the target port must be included in the
same VLAN as the source port when using MSTP (see "Spanning Tree
Algorithm" on page 241 ).
P ARAMETERS
These parameters are displayed:
◆ Source Port – The port whose traffic will be monitored.
(Range: 1-26)
◆ Target Port – The port that will mirror the traffic on the source port.
(Range: 1-26)
◆ Type – Allows you to select which traffic to mirror to the target port, Rx
(receive), Tx (transmit), or Both. (Default: Rx)
W EB I NTERFACE
To configure a local mirror session:
1.
Click Interface, Port, Mirror.
2. Select Add from the Action List.
3. Specify the source port.
4. Specify the monitor port.
5. Specify the traffic type to be mirrored.
6. Click Apply.
Figure 34: Configuring Local Port Mirroring