LevelOne GTL-2691 - Manual (Page 125)

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 125 –
Reset Statistics Clears statistics for RIP protocol messages 668
OSPF Open Shortest Path First (Version 2) 668
Network Area 670
Add Defines OSPF area address, area ID, and process ID 670
Show Shows configured areas 670
Show Process Show configured processes 670
System 673
Configure Configures the Router ID, global settings, and default information 673
Show Shows LSA statistics, administrative status, ABR/ASBR, area
count, and version number
676
Area 678
Configure Area 678
Add Area Adds NSSA or stub 678
Show Area Shows configured NSSA or stub 678
Configure NSSA Area Configures settings for importing routes into or exporting routes
out of not-so-stubby areas 679
Configure Stub Area Configures default cost, and settings for importing routes into a
stub
682
Show Information Shows statistics for each area, including SPF startups, ABR/ASBR
count, LSA count, and LSA checksum
684
Area Range 685
Add Configures route summaries to advertise at an area boundary 685
Show Shows route summaries advertised at an area boundary 685
Modify Modifies route summaries advertised at an area boundary 685
Redistribute 687
Add Redistributes routes from one routing domain to another 687
Show Shows route types redistributed to another domain 687
Modify Modifies configuration settings for redistributed routes 687
Summary Address 689
Add Aggregates routes learned from other protocols for advertising
into other autonomous systems 689
Show Shows configured summary addresses 689
Interface 691
Show Shows area ID and designated router settings for each interface 691
Configure by VLAN Configures OSPF protocol settings and authentication for specified
VLAN
691
Configure by Address Configures OSPF protocol settings and authentication for specified
interface address
691
Show MD5 Key Shows MD5 key ID used for each area 691
Table 6: Switch Main Menu (Continued)
Menu Description Page