Figure 396: configuring the vrrp group id, Figure 397: showing configured vrrp groups – LevelOne GTL-2691 User Manual
Page 644
Advertising
C
HAPTER
19
| Configuring Router Redundancy
Configuring VRRP Groups
– 644 –
Figure 396: Configuring the VRRP Group ID
To show the configured VRRP groups:
1.
Click IP, VRRP.
2.
Select Configure Group ID from the Step List.
3.
Select Show from the Action List.
Figure 397: Showing Configured VRRP Groups
To configure the virtual router address for a VRRP group:
1.
Click IP, VRRP.
2.
Select Configure Group ID from the Step List.
3.
Select Add IP Address from the Action List.
4.
Select a VLAN, a VRRP group identifier, and enter the IP address for the
virtual router.
5.
Click Apply.
Advertising