LevelOne GTL-2691 - Manual (Page 1573)

C HAPTER 50 | Multicast Routing Commands
PIM Multicast Routing
– 1573 –
Propagation Delay : 500 ms
Override Interval : 2500 ms
DR Priority : 20
Join/Prune Interval : 80 sec
Console#
clear ip pim bsr
rp-set
This command clears multicast group to RP mapping entries learned
through the PIMv2 bootstrap router (BSR).
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
◆ This command can be used to update entries in the static multicast
forwarding table immediately after making configuration changes to the
RP.
◆ Use the show ip pim rp mapping command to display active RPs that
are cached with associated multicast routing entries.
E XAMPLE
This example clears the RP map.
Console#clear ip pim bsr rp-set
Console#show ip pim rp mapping
PIM Group-to-RP Mappings
Console#
show ip pim
bsr-router
This command displays information about the bootstrap router (BSR).
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
This command displays information about the elected BSR.
E XAMPLE
This example displays information about the BSR.
Console#show ip pim bsr-router
PIMv2 Bootstrap information
BSR Address : 192.168.0.2/32
Uptime : 01:01:23
BSR Priority : 200
Hash Mask Length : 20
Expire : 00:00:42
Role : Candidate BSR