Show ethernet cfm maintenance-points local, Show ethernet cfm, Maintenance-points local – LevelOne GTL-2691 User Manual

Page 1325

Advertising
background image

C

HAPTER

44

| CFM Commands

Defining CFM Structures

– 1325 –

show ethernet cfm

maintenance-points

local

This command displays the maintenance points configured on this device.

S

YNTAX

show ethernet cfm maintenance-points local

{mep [domain domain-name | interface interface |

level level-id] | mip [domain domain-name | level level-id]}
mep – Displays only local maintenance end points.
mip – Displays only local maintenance intermediate points.
domain-name – Domain name. (Range: 1-43 alphanumeric

characters)
interface – Displays CFM status for the specified interface.

ethernet unit/port

unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-26)

port-channel channel-id (Range: 1-8)

level-id – Maintenance level for this domain. (Range: 0-7)

D

EFAULT

S

ETTING

None

C

OMMAND

M

ODE

Privileged Exec

C

OMMAND

U

SAGE

◆

Use the mep keyword with this command to display the MEPs

configured on this device as DSAPs through the

ethernet cfm mep

command.

◆

Using the mip keyword with this command to display the MIPs

generated on this device by the CFM protocol when the mip-creation

method is set to either “default” or “explicit” by the

ethernet cfm

domain

command or the

ma index name

command.

E

XAMPLE

This example shows all MEPs configured on this device for maintenance

domain rd.

Console#show ethernet cfm maintenance-points local mep

MPID MD Name Level Direct VLAN Port CC Status MAC Address

---- ---------------- ----- ------ ---- -------- --------- -----------------

1 rd 0 UP 1 Eth 1/ 1 Enabled 00-12-CF-3A-A8-C0

Console#

Advertising