LevelOne GTL-2691 - Manual (Page 1364)

C HAPTER 46 | DHCP Commands
DHCP Client
– 1364 –
ip dhcp restart client This command submits a BOOTP or DHCP client request.
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
◆ This command issues a BOOTP or DHCP client request for any IP
interface that has been set to BOOTP or DHCP mode through the ip
address command.
◆ DHCP requires the server to reassign the client’s last address if
available.
◆ If the BOOTP or DHCP server has been moved to a different domain,
the network portion of the address provided to the client will be based
on this new domain.
E XAMPLE
In the following example, the device is reassigned the same address.
Console(config)#interface vlan 1
Console(config-if)#ip address dhcp
Console(config-if)#exit
Console#ip dhcp restart client
Console#show ip interface
VLAN 1 is Administrative Up - Link Up
Address is 12-34-12-34-12-34
Index: 1001, MTU: 1500,
Address Mode is DHCP
IP Address: 192.168.0.9 Mask: 255.255.255.0
Proxy ARP is disabled
DHCP Inform is disabled
Console#
R ELATED C OMMANDS
ip address (1392)