Tacacs-server port, Tacacs-server retransmit – LevelOne GTL-2691 User Manual
Page 874
C
HAPTER
28
| Authentication Commands
TACACS+ Client
– 874 –
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
Console(config)#tacacs-server key green
Console(config)#
tacacs-server port
This command specifies the TACACS+ server network port. Use the no
form to restore the default.
S
YNTAX
tacacs-server port port-number
no tacacs-server port
port-number - TACACS+ server TCP port used for authentication
messages. (Range: 1-65535)
D
EFAULT
S
ETTING
49
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
Console(config)#tacacs-server port 181
Console(config)#
tacacs-server
retransmit
This command sets the number of retries. Use the no form to restore the
default.
S
YNTAX
tacacs-server retransmit number-of-retries
no tacacs-server retransmit
number-of-retries - Number of times the switch will try to
authenticate logon access via the TACACS+ server. (Range: 1 - 30)
D
EFAULT
S
ETTING
2
C
OMMAND
M
ODE
Global Configuration