LevelOne GTL-2691 - Manual (Page 108)

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 108 –
M AIN M ENU
Using the onboard web agent, you can define system parameters, manage
and control the switch, and all its ports, or monitor network conditions. The
following table briefly describes the selections available from this program.
Table 6: Switch Main Menu
Menu Description Page
System
General Provides basic system description, including contact information 129
Switch Shows the number of ports, hardware version, power status, and
firmware version numbers
131
Capability Enables support for jumbo frames;
shows the bridge extension parameters
132 ,
133
File 135
Copy Allows the transfer and copying files 135
Set Startup Sets the startup file 138
Show Shows the files stored in flash memory; allows deletion of files 138
Automatic Operation Code Upgrade Automatically upgrades operation code if a newer version is
found on the server 139
Time 139
Configure General
Manual Manually sets the current time 143
SNTP Configures SNTP polling interval 145
NTP Configures NTP authentication parameters 146
Configure Time Server Configures a list of SNTP servers 147
Configure SNTP Server Sets the IP address for SNTP time servers 147
Add NTP Server Adds NTP time server and index of authentication key 148
Show NTP Server Shows list of configured NTP time servers 148
Add NTP Authentication Key Adds key index and corresponding MD5 key 149
Show NTP Authentication Key Shows list of configured authentication keys 149
Configure Time Zone Sets the local time zone for the system clock 150
Console Sets console port connection parameters 151
Telnet Sets Telnet connection parameters 153
CPU Utilization Displays information on CPU utilization 155
Memory Status Shows memory utilization parameters 156
Renumbering Renumbers the units in the stack 156
Reset Restarts the switch immediately, at a specified time, after a
specified delay, or at a periodic interval
157
Interface
Port
General
Configure by Port List Configures connection settings per port 161