Displaying rp mapping, Figure 480: showing information about the pim6 bsr – LevelOne GTL-2691 User Manual
Page 743
C
HAPTER
21
| Multicast Routing
Configuring PIMv6 for IPv6
– 743 –
Figure 480: Showing Information About the PIM6 BSR
D
ISPLAYING
RP
M
APPING
Use the Routing Protocol > PIM6 > PIM6-SM (Show Information – Show RP
Mapping) page to display active RPs and associated multicast routing
entries.
CLI R
EFERENCES
◆
"show ipv6 pim rp mapping" on page 1597
P
ARAMETERS
These parameters are displayed:
◆
Groups – A multicast group address.
◆
RP Address – IP address of the RP for the listed multicast group.
◆
Information Source – RP that advertised the mapping, how the RP
was selected (Static or Bootstrap), and the priority used in the bidding
process.
◆
Uptime – The time this RP has been up and running.
◆
Expire – The time before this entry will be removed.
W
EB
I
NTERFACE
To display the RPs mapped to multicast groups:
1.
Click Routing Protocol, PIM6, PIM6-SM.
2.
Select Show Information from the Step list.
3.
Select Show RP Mapping from the Action list.