LevelOne GTL-2691 User Manual

Page 1019

Advertising
background image

C

HAPTER

32

| Link Aggregation Commands

Manual Configuration Commands

– 1019 –

D

EFAULT

S

ETTING

src-dst-ip

C

OMMAND

M

ODE

Global Configuration

C

OMMAND

U

SAGE

This command applies to all static and dynamic trunks on the switch.

To ensure that the switch traffic load is distributed evenly across all

links in a trunk, select the source and destination addresses used in the

load-balance calculation to provide the best result for trunk

connections:

dst-ip: All traffic with the same destination IP address is output on

the same link in a trunk. This mode works best for switch-to-router

trunk links where traffic through the switch is destined for many

different hosts. Do not use this mode for switch-to-server trunk

links where the destination IP address is the same for all traffic.

dst-mac: All traffic with the same destination MAC address is

output on the same link in a trunk. This mode works best for

switch-to-switch trunk links where traffic through the switch is

destined for many different hosts. Do not use this mode for switch-

to-router trunk links where the destination MAC address is the same

for all traffic.

src-dst-ip: All traffic with the same source and destination IP

address is output on the same link in a trunk. This mode works best

for switch-to-router trunk links where traffic through the switch is

received from and destined for many different hosts.

src-dst-mac: All traffic with the same source and destination MAC

address is output on the same link in a trunk. This mode works best

for switch-to-switch trunk links where traffic through the switch is

received from and destined for many different hosts.

src-ip: All traffic with the same source IP address is output on the

same link in a trunk. This mode works best for switch-to-router or

switch-to-server trunk links where traffic through the switch is

received from many different hosts.

src-mac: All traffic with the same source MAC address is output on

the same link in a trunk. This mode works best for switch-to-switch

trunk links where traffic through the switch is received from many

different hosts.

E

XAMPLE

Console(config)#port-channel load-balance dst-ip

Console(config)#

Advertising